3.6HP 2Stroke Electric Outboard Trolling Motor Outboard Fishing Boat Engine 55cc

Description

Store category
Sign Up Now !
You may also like
3.6HP 2Stroke Electric Outboard Trolling Motor Outboard Fishing Boat Engine 55cc
Product Description
Dimensions (L×W× H) mm
365×220x920
Propeller options
3-7¼ "x 5"
Starting system
Manual
Max. Output
2.6kw /3.6HP
Bore×Stroke (mm)
44x33
Full throttle operating range (rpm)
4000-5000
Control system
manual tilt
Mixed Rating: Fuel
Oil (30/50:1)
Cylinder
1
Displacement (ml)
55cc
Engine Position
Outboard
Gear ratio
2.08(27:13)
Gear shift position
Clutch control
Recommended Gear Oil
Professional Gear Oil
Cold style
Water-cooled
Transom height
42cm
Recommended Fuel
# 93 Lead-free gasoline
Brand
Unbranded
Manufacturer Part Number
OUTBOARDENGINE54877US
Warranty
2 Year
Engine(HP)
3.6HP
Stroke
2Stroke
Country/Region of Manufacture
Unknown
NOTES:
Please add gear oil to the motor before use it, and remember to replace the oil after the run-in period(10 hours)
About certification:
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
what is more:
1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon
2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed
3.It can be marched with inflatable boats, rubber boats or fishing boats
4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat
Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.
Don't do the following will avoid cylinder Scoring:
1，start the motor on bank
2, use the motor when it stop coming out of water
Even if you want test the motor, it should be done in the river!
When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.
Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
· Start-In-Gear protection/clutch feature prohibits prop rotation while idling
· Lift/Tilt feature for shallow water operation and convenience
· Features 360 degree steering rotation for reverse without gear shifting
· Superior engine water cooling system for improved engine performance
· Easy pull off engine cover with push button latch for instant motor access
Specification:
1)Max. Output: 2.6kw /3.6HP
2)Full throttle operating range (rpm): 4000-5000
3)Stroke: 2
4)Cylinder:1
5)Displacement (ml): 55CC
6)Bore×Stroke (mm): 44×33
7)Dimensions (L×W× H) mm: 365×220x920
8)Transom height:42cm
9)Starting system: Manual
10)Control system: manual tilt
11)Gear shift position: Clutch control
12)Gear ratio:2.08(27:13)
13)Propeller options: 3-7¼ "x 5"
14) Recommended Fuel: # 93 Lead-free gasoline
15)Recommended Gear Oil: Professional Gear Oil
16) Mixed Rating: Fuel : Oil (30/50:1)
17) Cold style: Water-cooled
18)Engine Position:Outboard
Product DescriptionFeatures:
. Features 360 degree steering rotation for reverse without gear shifting
. Start-In-Gear protection/clutch feature prohibits prop rotation while idling
. Lift/Tilt feature for shallow water operation and convenience
. Superior engine water cooling system for improved engine performance
. Easy pull off engine cover with push button latch for instant motor access
. Standard CDI ignition system for easy starting and improved performance
. Vertical mount engine design for increased power, performance and durability
. Superior carbonation system with primer bulb for increased efficiency
. Twist grip throttle handle and engine stop button for improved response
. Superior outboard anti corrosion system and anodes for increased durability
. Durable cast nylon plastic construction for superior corrosion protection
. Through the prop exhaust outlet for decreased noise and pollutant
. Black propeller or white propeller would be sent at random.Shipping Weight: 21.4 pounds
Short shaft ：40cm
2-stroke
the engine oil must be a two-stroke special engine oil, and the two oils must be stirred evenly
In addition: After use, the fuel in the carburetor must be completely discharged.
How to use the two-stroke marine engine:
1. Insert the emergency flameout cable plug into the flameout switch slot
2. Connect the fuel tank to the engine according to the direction indicated by the arrow of the hand core pump.
3. Loosen the air switch on the fuel tank cap counterclockwise.
4. Squeeze the hand core pump several times by hand until the oil circuit is full of fuel and the hand pump feels hard.
5. Set the shift position to the neutral position.
6. Turn the throttle control handle to the start position (ie: the start mark on the handle is aligned with the control arm mark).
7. When the engine is cold, pull out the choke lever (in order to increase the concentration of the combustible mixture and make the engine easier to start). Tip: Cold engine refers to an engine that has not been started for one day or more.
8. Pull the starter handle by hand, quickly pull out the starter rope after the starter engages with the flywheel, and repeat the pullout until the engine is started. Tip: Engagement means that the parts with toothed parts must feel resistance when pulling the starting rope during transmission, otherwise the parts will be damaged.
9. After the engine is started, run the engine at the lowest throttle for 2-3 minutes to warm up the engine, then push the choke lever to the initial position and the throttle to the minimum position. After the engine is started, pay attention to whether the cooling water flows out steadily. If there is no water or intermittent water flow, stop and check the cause.
Announcements
After in the sea water or turbid water cruising
1.Use the fresh water cleaning the outboard motor
2.With the moderate velocity circulating the engine, cool off the water chanel with fresh water.
3. Before completely running out cooling water, don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.
4. The engine should deposit in the aridity and ventilated well place, avoid exposing directly in the sunshine.
5. Before the long term storing,you should run out of the gasoline in the fuel tank.
Contact US:
We will try our best to provide our customers the best customer service.
Please feel free to email us through
eBay if you have any question regarding our products.Also,
if there is any problem, please email us to resolve it beforeleaving your feedback.
We will get back to you very soon!!
3 Year Warranty:
This item have 3-year warranty.
In the event the item should fail due to manufacturing defects during intended use, we will replace the part by free.
We only warranty cost of item parts. Any installation or other fees are non-refundable.
Note: Any modifying the item of any kind without contacting us will void any and all warranty coverage for this item.
Please contact us before modifying the part so that we have the opportunity to correct the situation.
You can contact us by ebay message to get the full text of the written warranty.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PayPal payment only
Payment must be received within 7 days after order is made.
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Feedback
On Jun-08-21 at 20:51:08 PDT, seller added the following information: