MERCOTAC 330 Rotary Electric Connector, 3 Conductors, 30A, 240V, 1200 RPM

Description

Model 330
Three Conductors,
30 amps
Disconnects included (6 lg.)
Boot Kit
available (optional, please contact us to order)
Available with stainless steel ball bearing (330-SS)
Model No.
Terminals
Voltage
AC/DC
Amp
Rating
@240VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
330
3
0-250
30
100
<1m
1200
140 (60) /-20(-29)
300
>25M
330-SS
3
0-250
30
100
<1m
1200
140 (60) /-20(-29)
300
>25M
"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
Model 330 Accessories
55251
Terminal 16 - 14 AWG
(qty. 3 included)
57430
Boot Kit
for dust or splash protection
IP51 (not included)
55253
Shrink Tube (qty. 3 included)
55252
Terminal 16 - 14 AWG (qty. 3 included)
Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)
Model 330 Standard Wire Connections
Model 330 Wire Connections With Optional Boot Kit
Model 330 Suggested Mounting Methods
Model 330 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.
Typical Body Mount Hole Dimensions
MODEL
HOLE DIAMETER (Ø) *
DEPTH
330 et al
1.248" (31.70)
.80" (20)
Typical Bushing Mount Hole Dimensions
330 et al
.625" (15.88)
.40" (10)
*Inch (mm) Tolerance Ø
+.001" (+.025)
-.000" (-.000)
Installation Notes:
the up arrow should not point below horizontal
do not solder to or bend connector tabs
avoid lateral forces and mechanical loads (overly stiff or tight wires)
do not rigid mount both ends of connector
limit mounting eccentricity (runout / wobble) to .005" (.13mm)
provide overload protection within the circuit
avoid vibration and bumping motions