Repair Kit For Bosch 0438140011 Warm Up Regulator Porsche VW Audi Ford Nissan

Description

Repair kit for Bosch Warm Up Regulator without vacuum adjustment. Suitable for the repair of the following part number:
0438140011
For a restoration that is true to the original, all visible screws and parts (except the Banjo Bolt ) are yellow galvanized as in the original and are of excellent quality.
Almost all parts
(All O-rings, housing seal, membrane, Banjo Bolt and almost all screws)
made in Germany
.
Scope of delivery:
1x spring stainless steel membrane for fuel chamber
1x housing seal
1x sealing ring for fuel chamber
1x sealing ring for bimetal heating
4x housing screw
4x housing nut
4x fuel chamber screw
4x copper sealing ring
1x washer for bimetal heating
1x spring ring for bimetal heating
1x nut for bimetal heating
2x mounting screw
2x spring washer
2x Banjo Bolt
We want your K-Jetronic to really work after the overhaul. Therefore: We are available by phone or email for control pressure data, queries about settings and repairs.
__________
Repair Set for Bosch non-vacuum Warm Up Regulators. Suitable for repairing the following part number:
0438140011
For a true to original restoration, all visible screws and parts (except for the banjo bolts) are yellow zinc plated and of excellent quality.
Nearly all parts
(All O-rings, housing gasket, membrane, banjo bolts and nearly all of the screws)
are made in Germany
.
Delivery:
1x Fuel Chamber membrane (stainless spring steel)
1x housing gasket
1x O-ring for fuel chamber
1x O-ring for heating unit
4x Housing Screw
4x Housing Hex Nut
4x Fuel Chamber Screw
4x copper washer
1x Washer for Heating Unit
1x Spring Washer for Heating Unit
1x Hex-Nut for Heating Unit
2x assembly screw
2x spring washer
2x banjo bolt
We really want to have your K-Jetronic working after repair. Therefore: For further questions on control-pressure values, on adjustment and repair you can contact us via phone or email.
For a restoration that is true to the original, all visible screws and parts (except the Banjo Bolt ) are yellow galvanized as in the original and are of excellent quality. Almost all parts (All O-rings, housing seal, membrane, Banjo Bolt and almost all screws) made in Germany. We want your K-Jetronic to really work after the overhaul. Therefore: We are available by phone or email for control pressure data, queries about settings and repairs. For a true to original restoration, all visible screws and parts (except for the banjo bolts) are yellow zinc plated and of excellent quality. Nearly all parts (All O-rings, housing gasket, membrane, banjo bolts and nearly all of the screws) are made in Germany. We really want to have your K-Jetronic working after repair. Therefore: For further questi